Quick Ways On How To Lay A Patio

April 3, 2017 | Patio & Garden

outdoor rattan patio furniture

Having a patio in your yard can simply transform your bare space into an area for recreation. A patio is quite useful especially if you usually have guests coming over your house or if you would like to have a place where you can relax and relish the outdoor breeze.

It is a common belief that you must have skills and knowledge as a builder to be able to install a patio in your residence. This is false. Anybody can build a patio in their yard once they have all the fundamental materials and follow complete step-by-step instructions on how to lay a patio.

How to Lay a Patio: Important Materials

The process in how to lay a patio isn’t very difficult even if you do not have any knowledge in landscaping. However, make certain you refer to the instructions carefully and thoroughly in order to avoid having mistakes.

Another suggestion is to invest on the materials that you will use on making your patio. Do not use items that are feebly and low quality. You don’t want to have shaky pavers every so often. It is time consuming and also waste of cash.

Here are the required materials and equipment in laying a patio:

  • Materials hardcore
  • Building sand
  • Cement
  • Woburn rumbled paviours
  • Shovel, rake, wheelbarrow, wooden level pegs, hammer, spirit level, plank of wood, wacker plate, cement mixer, rubber mallet, bolster chisel, pointing trowel

How to Lay a Patio without Experience

This step-by-step procedure on how to lay a patio can be performed even without prior experience to construction and building.

Step 1 – Measure the design of your patio. Lay it out with stakes and string.

Step 2 – Dig deep into the garden soil within the patio layout. Remove all grass, rocks, debris and at least 6 inches of dirt. Make the excavated ground as level as possible so that your patio would be equalized. But if your patio is across your house, create a gradual slope from your house by excavating An inch deeper every 3 feet as you move away from your property.

Step 3 – Add a 5-inch layer of crushed gravel to the excavated surface. Rake the gravel and make it leveled. By using a plate compactor, press the gravel until it is snuggled together.

Step 4 – Lay the slabs according to your design. Leave An inch space among the stone as a mortar line. You may need to cut some stones for them to fit your pattern. Use a masonry blade with diamond chips on a circular saw for cutting natural stone.

Step 5 – Do the finishing touches. Sweep stone dust or sand in to the crevices between the stones. Wet the patio with your garden hose. But do not pour water directly into the cervices.

Related For Quick Ways On How To Lay A Patio

Privacy Policy | Terms of Use | Contact Us